TP1
PRISE EN MAIN DE LA CARTE FPGA DE1 ET DE L'ENVIRONNEMENT DE DEVELOPEMENT ALTERA QUARTUS II
Objectif :
L'objectif de ce TP est de prendre en main les outils de conception Quartus. Vous allez apprendre dans ce TP un flow de conception de type top-down, c'est-à-dire de la spécification à la synthèse de composants, en passant par la simulation.
Le TP est divisé en deux parties, la première porte sur les outils et la carte DE1, tandis que la deuxième partie, porte sur des exercices d'application qui seront notés
Partie I. Prise en main de Quartus II
I. Conception d'un nouveau Projet
Généralement, un système électronique est composé de plusieurs composants. Chaque composant est décrit, compilé et simulé indépendamment des autres avant d'être relié aux autres. Pour cela, il est nécessaire de créer un projet.
a. Lancer Quartus II dans le menu Démarrer\Altera\Quartus II. La fenêtre suivante apparaît: ....
....
TP1_FPGA_S1_2016 Copy.pdf

For Quartus II 12.0
1 Introduction
This tutorial presents an introduction to the Quartus® II CAD system. It gives a general overview of a typical CAD
flow for designing circuits that are implemented by using FPGA devices, and shows how this flow is realized in the
Quartus II software. The design process is illustrated by giving step-by-step instructions for using the Quartus II
software to implement a very simple circuit in an Altera FPGA device.
The Quartus II system includes full support for all of the popular methods of entering a description of the desired
circuit into a CAD system. This tutorial makes use of the schematic design entry method, in which the user draws
a graphical diagram of the circuit. Two other versions of this tutorial are also available, which use the Verilog and
VHDL hardware description languages, respectively.
The last step in the design process involves configuring the designed circuit in an actual FPGA device. To show
how this is done, it is assumed that the user has access to the Altera DE-series Development and Education board
connected to a computer that has Quartus II software installed. A reader who does not have access to the DE-series
board will still find the tutorial useful to learn how the FPGA programming and configuration task is performed.
The screen captures in the tutorial were obtained using the Quartus